ICP Chemical Analysis

Thursday, April 23, 2015

ICP (Inductively Coupled Plasma) analysis quantitatively measures the elemental content of a material specimen. ICP analysis is performed using computer-controlled spectrometers. Here the computer software monitors the instrument functions, while processing, storing and outputting data. This type of analysis can be performed on both solid and liquid samples; however, a solid sample must be digested, or turned to liquid using an acidic aqueous solution, prior to testing.

Miami Valley Materials Testing Center has the capability of handling material testing for nearly every industry. Our Chemists, Engineers and Technicians off our clients a wealth of knowledge and experience in the engineering and quality assurance industries. Our testing laboratory uses chemical analysis techniques to check raw materials received by our clients for impurities or contaminants. With our extensive experience in chemical and engineering analysis we can determine the most accurate testing procedure for any give sample.

MVMTC offers Chemical Analysis of the following metals and alloys:

E1257 - Aluminum & Aluminum Alloy
(Be, Bi, B, Ca, Cr, Co, Cu, Ga, Fe, Pb, Li, Mg, Mn, Ni, P, Si, Na, St, Sb, Ti, V, Zn) 

E1999 - Cast Iron
( C, Cr, Cu, Mn, Mo, Ni, P, Si, S, Sb, Ti, V)

E415 - Carbon & Low Alloy Steel
( Al, As, B, Ca, C, Cr, Co, Cu, Mn, Mo, Ni, Nb, P, Si, S, Sb, Ti, Zr)

E1086 - Stainless Steel
(Cr, Ni, Mo, Mn, Si, Cu, C, P, S )

WI-6 - Titanium
(Al, Fe, V)

Zinc & Copper Alloys

1019 - Combustion
(C, S)


For more information visit our website or contact us today!

No comments:

Post a Comment

There was an error in this gadget